{"id":1747,"date":"2021-08-16T08:40:14","date_gmt":"2021-08-16T08:40:14","guid":{"rendered":"https:\/\/3d-industrija.si\/?p=1747"},"modified":"2021-08-16T13:42:16","modified_gmt":"2021-08-16T13:42:16","slug":"minifactory-ultra-3d-tiskalnik","status":"publish","type":"post","link":"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/","title":{"rendered":"miniFactory Ultra 3D-tiskalnik"},"content":{"rendered":"

[et_pb_section fb_built=”1″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_row _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.9.11″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″]<\/p>\n

Ve\u010dletne izku\u0161nje, odli\u010dno poznavanje potreb industrije in izpopolnjene ve\u0161\u010dine 3D-tiska odlikujejo finsko podjetje, MiniFactory<\/strong>, ustanovljeno leta 2012. Proizvajalca industrijskih 3D-tiskalnikov, predanega zagotavljanju visoko zmogljivih polimerov<\/strong> za 3D-tisk in najbolj\u0161im rezultatom 3D-natisnjenih delov industrijskega razreda<\/strong>.<\/p>\n

[\/et_pb_text][\/et_pb_column][\/et_pb_row][et_pb_row column_structure=”1_2,1_2″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”1_2″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.9.11″ _module_preset=”default” custom_margin=”23px||||false|false” global_colors_info=”{}”]<\/p>\n

Temperatura komore:<\/strong> 250\u00b0C.
Temperatura plo\u0161\u010de:<\/strong> 250\u00b0C.
Temperatura ekstrudiranja:<\/strong> 470\u00b0C.
Mehanika:<\/strong> AC servo motor & krogli\u010dni vijaki razreda C5.
Ponovljivost: <\/strong>0,025 mm\/400 mm.
\u0160obe:<\/strong> dve lo\u010deni \u0161obi.
Prostornina za tisk:<\/strong> 330 mm x 180 mm x 180 mm.
Materiali:<\/strong> PEI, PEKK, PAEK, PEEK, PPSU, PPS, PVDF, PA, PC, ABS (in \u0161iroka paleta GF\/CF ESD polimerov).<\/p>\n

[\/et_pb_text][\/et_pb_column][et_pb_column type=”1_2″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_image src=”https:\/\/3d-industrija.si\/wp-content\/uploads\/2021\/08\/miniFactory-Low-humidity-box-for-filament-storage.png” title_text=”miniFactory-Low-humidity-box-for-filament-storage” _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][\/et_pb_image][\/et_pb_column][\/et_pb_row][et_pb_row _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.9.11″ _module_preset=”default” custom_padding=”||3px|||” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″]<\/p>\n

Odprt sistem materialov
<\/strong>
Raz\u0161irite obzorja in dostopajte do izjemne palete materialov z na\u0161im Ultra<\/strong> 3D-tiskalnikom.
MiniFacotry Ultra 3D-tiskalnik<\/strong> ima napredno ogrevano komoro<\/strong>, ki dosega temperature do 250\u00b0C<\/strong>, kar odpira nov spekter materialov za uporabo.
Izbirate lahko vse od proizvodnih<\/strong> do in\u017eenirskih polimerov<\/strong> ter do najbolj iskanih visoko zmogljivih polimerov<\/strong> ter kompozitov<\/strong>. Spekter materialov je ob\u010dutno ve\u010dji, kot pri \u00bbzaprtih sistemih\u00ab ali sistemih z ni\u017ejo temperaturo komore.<\/p>\n

\u2022 ULTEM1010<\/strong>, ULTEM9085,<\/strong> PPSU<\/strong>, PSU<\/strong>, PPS<\/strong>, PEEK<\/strong>, PAEK<\/strong>, PEKK<\/strong>, PVDF<\/strong>, PC<\/strong>, PA<\/strong>, ABS<\/strong> in \u0161e veliko ve\u010d \u010distih polimerov<\/strong>.
\u2022 CF-ULTEM<\/strong>, CF-PEKK<\/strong>, CF-PEEK<\/strong>, ESD-PEEK<\/strong>, GF-PA<\/strong> in mnogi kompoziti<\/strong>.<\/p>\n

[\/et_pb_text][\/et_pb_column][\/et_pb_row][et_pb_row column_structure=”1_2,1_2″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”1_2″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_image src=”https:\/\/3d-industrija.si\/wp-content\/uploads\/2021\/08\/miniFactory-UltemAm9085F-1-scaled.jpg” title_text=”miniFactory-UltemAm9085F-1″ _builder_version=”4.9.11″ _module_preset=”default” custom_margin=”42px|0px|0px|0px|false|false” global_colors_info=”{}”][\/et_pb_image][\/et_pb_column][et_pb_column type=”1_2″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

Plo\u0161\u010da za tisk:<\/strong> notranji vakuumski sistem.
Poravnava:<\/strong> polna avtomatska kalibracija.
Upravljanje:<\/strong> zaslon na dotik.
Varnost:<\/strong> za\u0161\u010diten z RCD aktiviranim karbonskim filtriranjem.
Premer filamenta:<\/strong> 1,75 mm.
Hlajenje:<\/strong> hlajenje s teko\u010dino in zrakom.
Senzorji:<\/strong> senzorji za zaznavo ma\u0161enja \u0161ob in zmanjka filamenta.
Dodatki:<\/strong> AARNI sistem za nadzor procesov, ogrevana komora za filamente.
Programska oprema za razrez:<\/strong> Simplify 3D.
Certifikati:<\/strong> CE.
Mere naprave:<\/strong> 100 x 80 x 190 cm.
Te\u017ea naprave:<\/strong> 320 kg.
Napetost:<\/strong> 400 V\/16A 3-fazni.<\/p>\n

[\/et_pb_text][\/et_pb_column][\/et_pb_row][et_pb_row _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

Komora s temperaturo do 250\u00b0C \u2013 zakaj jo potrebujete?
<\/strong>
Izjemno visoka temperatura<\/strong> komore odpira \u0161ir\u0161i spekter materialov<\/strong> za uporabo in zagotavlja ultimativno trdnost<\/strong> 3D-natisnjenih delov.
Optimalna temperatura ogrevane komore je temperatura steklastega prehoda<\/strong> uporabljenega polimera.
Ogrevana komora MiniFactory Ultra<\/strong> 3D-tiskalnika lahko dose\u017ee temperaturo 250\u00b0C<\/strong>. Ravno ogrevana komora<\/strong> je najbolj pomemben dejavnik zagotavljanja najbolj\u0161ih rezultatov<\/strong>.
Temperatura steklastega prehoda <\/strong>(TG) je ena pomembnej\u0161ih termofizi\u010dnih lastnosti amorfnih polimerov.<\/p>\n

Pri tej temperaturi:<\/strong>
– So polimerske verige naklju\u010dno orientirane in se prosto gibljejo -> trdnost<\/strong>.
– Polimeri so strukturno spro\u0161\u010deni in se enakomerno ohlajajo -> dimenzionalna stabilnost<\/strong>.<\/p>\n

Optimalne temperature komore za tisk z naslednjimi visoko-zmogljivmi polimeri:<\/strong><\/p>\n

– PPSU:<\/strong> 220\u00b0C.
– ULTEM 1010<\/strong>: 217\u00b0C.
– ULTEM 9085:<\/strong> 185\u00b0C.
– PEKK-A:<\/strong> 160\u00b0C.<\/p>\n

 <\/p>\n

[\/et_pb_text][\/et_pb_column][\/et_pb_row][et_pb_row column_structure=”1_2,1_2″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”1_2″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_image src=”https:\/\/3d-industrija.si\/wp-content\/uploads\/2021\/08\/miniFactory-UltemAm1010F-1-scaled.jpg” title_text=”miniFactory-UltemAm1010F-1″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][\/et_pb_image][\/et_pb_column][et_pb_column type=”1_2″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_image src=”https:\/\/3d-industrija.si\/wp-content\/uploads\/2021\/08\/miniFactory-UltemAm9085F-1-scaled.jpg” title_text=”miniFactory-UltemAm9085F-1″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][\/et_pb_image][\/et_pb_column][\/et_pb_row][et_pb_row column_structure=”1_2,1_2″ _builder_version=”4.9.11″ _module_preset=”default” custom_padding=”||0px|||” global_colors_info=”{}”][et_pb_column type=”1_2″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

Kako prepoznati kdaj je temperatura ogrevane komore pod temperaturo steklastega prehoda polimera:
<\/strong>
– Slaba adhezija med plastmi.
– Srednja mehanska trdnost.
– Visok mehanski stres.
– Visoko ukrivljanje \/ pokanje.<\/p>\n

[\/et_pb_text][\/et_pb_column][et_pb_column type=”1_2″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

Kako prepoznati kdaj je temperatura ogrevane komore nad temperaturo steklastega prehoda polimera:
<\/strong>
– Odli\u010dna adhezija plasti.
– Visoka mehanska trdnost.
– Nizek mehanski stres.
– Nizko ukrivljanje\/pokanje.<\/p>\n

[\/et_pb_text][\/et_pb_column][\/et_pb_row][et_pb_row _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

Ogrevana komora za filamente \u2013 zakaj jo potrebujete?
<\/strong>
Visoko-zmogljivi polimeri<\/strong> so izredno ob\u010dutljivi na vlago<\/strong>. Ogrevana komora za shranjevanje filamentov 3D-tiskalnika MiniFactory Ultra<\/strong> zagotavlja optimalne pogoje<\/strong> za shranjevanje materiala<\/strong>.
Mo\u017enost shranjevanja filamentov pri temperaturi do 120\u00b0C<\/strong> in nadzorovani vla\u017enosti<\/strong>, omogo\u010da optimalne pogoje<\/strong> za tisk.
Temperature do 120\u00b0C prepre\u010dujejo negativne u\u010dinke<\/strong> vlage na filament.
AARNI<\/strong> nadzira temperaturo<\/strong> in vla\u017enost.<\/strong><\/p>\n

[\/et_pb_text][\/et_pb_column][\/et_pb_row][et_pb_row column_structure=”1_2,1_2″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”1_2″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_image src=”https:\/\/3d-industrija.si\/wp-content\/uploads\/2021\/08\/miniFactory-PEKK-A-4.jpg” title_text=”miniFactory-PEKK-A-4″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][\/et_pb_image][\/et_pb_column][et_pb_column type=”1_2″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_image src=”https:\/\/3d-industrija.si\/wp-content\/uploads\/2021\/08\/miniFactory-PEKK-A-3.jpg” title_text=”miniFactory-PEKK-A-3″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][\/et_pb_image][\/et_pb_column][\/et_pb_row][et_pb_row _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

AARNI sistem za nadzor procesov – vrhunski sistem za nadzor procesov<\/strong><\/p>\n

Naj AARNI<\/strong> prevzame nadzor in certificira va\u0161e modele.<\/p>\n

MiniFactory AARNI<\/strong> sistem za nadzor procesov predstavlja prvo linijo na\u0161ega visoko zmogljivega polimernega ekosistema 3D-tiska<\/strong>. Pove\u017eite va\u0161 Ultra 3D-tiskalnik<\/strong> in AARNI<\/strong> ter si zagotovite industrijsko raven nadzora kakovosti<\/strong> va\u0161ih 3D-natisnjenih delov<\/strong>.
Za certificiranje<\/strong> va\u0161ih 3D-natisnjenih delov<\/strong> potrebujete informacije, ki jih zagotovi. Linijo po linijo in plast za plastjo izvaja nadzor tiska<\/strong> in zagotavlja, da se je tisk izvedel, kot na\u010drtovano.<\/p>\n

[\/et_pb_text][\/et_pb_column][\/et_pb_row][et_pb_row column_structure=”1_2,1_2″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”1_2″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_image src=”https:\/\/3d-industrija.si\/wp-content\/uploads\/2021\/08\/Aarni-mF-4.jpg” title_text=”Aarni-mF-4″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][\/et_pb_image][\/et_pb_column][et_pb_column type=”1_2″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_image src=”https:\/\/3d-industrija.si\/wp-content\/uploads\/2021\/08\/Aarni-mF-3.jpg” title_text=”Aarni-mF-3″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][\/et_pb_image][\/et_pb_column][\/et_pb_row][et_pb_row _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.9.11″ _module_preset=”default” custom_padding=”||0px|||” global_colors_info=”{}”]<\/p>\n

Avtomatska kalibracija<\/strong><\/p>\n

Avtomatska kalibracija zagotavlja optimalno adhezijo<\/strong> prve plasti.
Kalibracija se samodejno za\u017eene pred vsakim tiskom. Tekom kalibracije sonda meri razdaljo med 25 razli\u010dnimi to\u010dkami in glede na pridobljene vrednosti umeri platformo.<\/p>\n

Individualno premikanje \u0161ob<\/strong><\/p>\n

Leva in desna \u0161oba se lahko premikata individualno v Z smeri. Med tiskom se aktivna \u0161oba avtomatsko spusti, neaktivna pa ostane v zgornjem polo\u017eaju in tako prepre\u010duje trke.<\/p>\n

Notranji vakuumski sistem plo\u0161\u010de za tisk<\/strong><\/p>\n

Vakuumska \u010drpalka<\/strong> je fiksni del sistema, zato ni potreban povezava z zunanjiim zra\u010dnim tlakom.
Notranji vakuumski sistem zagotavlja enostavne in hitre spremembe platforme za tisk. Notranji \u010drpalki lahko enostavno sledite z integriranim merilcem<\/strong>.<\/p>\n

[\/et_pb_text][\/et_pb_column][\/et_pb_row][et_pb_row _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_image src=”https:\/\/3d-industrija.si\/wp-content\/uploads\/2021\/08\/miniFactory-Materials.jpg” title_text=”miniFactory-Materials” _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][\/et_pb_image][\/et_pb_column][\/et_pb_row][et_pb_row _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

Samodejna naknadna obdelava<\/strong><\/p>\n

Naknadno obdelavo lahko za\u010denete s preprostim pritiskom na zaslon, kar spro\u017ei proces \u017earjenja izbranega materiala. Ni potrebe po lo\u010deni opemi za naknadno obdelavo.<\/p>\n

Tehnologija, ki jo poganjajo servo motorji in krogli\u010dni vijaki<\/strong><\/p>\n

MiniFactory Ultra<\/strong> je eden izmed najbolj natan\u010dnih FFF 3D-tiskalnikov<\/strong>, izjemna ponovljivost rezultatov temelji na tehnologiji industrijske ravni<\/strong>.
Natan\u010dnost<\/strong> in stabilnost<\/strong> z najbolj\u0161imi servo motorji<\/strong>, krogli\u010dnimi vijaki<\/strong> in linearnimi vodili<\/strong> zagotavljajo velike, dimenzijsko natan\u010dne<\/strong> in precizno ponovljive rezultate<\/strong> tisk za tiskom. Brez izgubljanja ali prilagajanja pasov.<\/p>\n

Krogli\u010dni vijaki naprave so razreda C5<\/strong>. Resolucija enkodiranja pravih AC servo motorjev je 10.000 CPR in napake mehani\u010dnih komulativnih polo\u017eajev 0,025 mm\/400 mm.<\/p>\n

[\/et_pb_text][\/et_pb_column][\/et_pb_row][et_pb_row column_structure=”1_2,1_2″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”1_2″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_image src=”https:\/\/3d-industrija.si\/wp-content\/uploads\/2021\/08\/minifactory_active_carbon_filter.png” title_text=”minifactory_active_carbon_filter” _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][\/et_pb_image][\/et_pb_column][et_pb_column type=”1_2″ _builder_version=”4.9.11″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.9.11″ _module_preset=”default” custom_margin=”77px||||false|false” global_colors_info=”{}”]<\/p>\n

Filtriranje z aktivnim ogljikom<\/strong><\/p>\n

Filtriranje bo ob\u010dutno zmanj\u0161alo koli\u010dino emisij med tiskom.
Filtre lahko enostavno zamenjate, kadar je to potrebno.<\/p>\n

[\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section]<\/p>\n","protected":false},"excerpt":{"rendered":"

Raz\u0161irite obzorja in dostopajte do izjemne palete materialov z na\u0161im Ultra 3D-tiskalnikom.
\nNapredna ogrevana komora, ki dosega temperature do 250\u00b0C odpira nov spekter materialov za uporabo.
\nIzbirate lahko vse od proizvodnih do in\u017eenirskih polimerov ter do najbolj iskanih visoko-zmogljivih polimerov ter kompozitov. <\/p>\n","protected":false},"author":2,"featured_media":1757,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"on","_et_pb_old_content":"","_et_gb_content_width":"","om_disable_all_campaigns":false,"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"_uf_show_specific_survey":0,"_uf_disable_surveys":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[16],"tags":[],"class_list":["post-1747","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-novice"],"yoast_head":"\nminiFactory Ultra 3D-tiskalnik - iTehLab d.o.o. | 3D-industrija<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"miniFactory Ultra 3D-tiskalnik - iTehLab d.o.o. | 3D-industrija\" \/>\n<meta property=\"og:description\" content=\"Raz\u0161irite obzorja in dostopajte do izjemne palete materialov z na\u0161im Ultra 3D-tiskalnikom. Napredna ogrevana komora, ki dosega temperature do 250\u00b0C odpira nov spekter materialov za uporabo. Izbirate lahko vse od proizvodnih do in\u017eenirskih polimerov ter do najbolj iskanih visoko-zmogljivih polimerov ter kompozitov.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/\" \/>\n<meta property=\"og:site_name\" content=\"iTehLab d.o.o. | 3D-industrija\" \/>\n<meta property=\"article:published_time\" content=\"2021-08-16T08:40:14+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2021-08-16T13:42:16+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/3d-industrija.si\/wp-content\/uploads\/2021\/08\/miniFactory-Ultra-1-724x1024.png\" \/>\n\t<meta property=\"og:image:width\" content=\"724\" \/>\n\t<meta property=\"og:image:height\" content=\"1024\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"Teja Kristof\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Teja Kristof\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/#article\",\"isPartOf\":{\"@id\":\"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/\"},\"author\":{\"name\":\"Teja Kristof\",\"@id\":\"https:\/\/3d-industrija.si\/#\/schema\/person\/7bb7bde1b36b2d5223ccd3255d23d6a9\"},\"headline\":\"miniFactory Ultra 3D-tiskalnik\",\"datePublished\":\"2021-08-16T08:40:14+00:00\",\"dateModified\":\"2021-08-16T13:42:16+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/\"},\"wordCount\":1878,\"commentCount\":0,\"image\":{\"@id\":\"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/3d-industrija.si\/wp-content\/uploads\/2021\/08\/miniFactory-Ultra-1.png\",\"articleSection\":[\"Novice\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/\",\"url\":\"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/\",\"name\":\"miniFactory Ultra 3D-tiskalnik - iTehLab d.o.o. | 3D-industrija\",\"isPartOf\":{\"@id\":\"https:\/\/3d-industrija.si\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/3d-industrija.si\/wp-content\/uploads\/2021\/08\/miniFactory-Ultra-1.png\",\"datePublished\":\"2021-08-16T08:40:14+00:00\",\"dateModified\":\"2021-08-16T13:42:16+00:00\",\"author\":{\"@id\":\"https:\/\/3d-industrija.si\/#\/schema\/person\/7bb7bde1b36b2d5223ccd3255d23d6a9\"},\"breadcrumb\":{\"@id\":\"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/#primaryimage\",\"url\":\"https:\/\/3d-industrija.si\/wp-content\/uploads\/2021\/08\/miniFactory-Ultra-1.png\",\"contentUrl\":\"https:\/\/3d-industrija.si\/wp-content\/uploads\/2021\/08\/miniFactory-Ultra-1.png\",\"width\":2481,\"height\":3509},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/3d-industrija.si\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"miniFactory Ultra 3D-tiskalnik\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/3d-industrija.si\/#website\",\"url\":\"https:\/\/3d-industrija.si\/\",\"name\":\"iTehLab d.o.o. | 3D-industrija\",\"description\":\"Vse o uporabi 3D-tehnologij v industirji.\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/3d-industrija.si\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Person\",\"@id\":\"https:\/\/3d-industrija.si\/#\/schema\/person\/7bb7bde1b36b2d5223ccd3255d23d6a9\",\"name\":\"Teja Kristof\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/3d-industrija.si\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/959cf165da1eaf1e622c0146e584140b?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/959cf165da1eaf1e622c0146e584140b?s=96&d=mm&r=g\",\"caption\":\"Teja Kristof\"},\"url\":\"https:\/\/3d-industrija.si\/index.php\/author\/tejak\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"miniFactory Ultra 3D-tiskalnik - iTehLab d.o.o. | 3D-industrija","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/","og_locale":"en_US","og_type":"article","og_title":"miniFactory Ultra 3D-tiskalnik - iTehLab d.o.o. | 3D-industrija","og_description":"Raz\u0161irite obzorja in dostopajte do izjemne palete materialov z na\u0161im Ultra 3D-tiskalnikom. Napredna ogrevana komora, ki dosega temperature do 250\u00b0C odpira nov spekter materialov za uporabo. Izbirate lahko vse od proizvodnih do in\u017eenirskih polimerov ter do najbolj iskanih visoko-zmogljivih polimerov ter kompozitov.","og_url":"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/","og_site_name":"iTehLab d.o.o. | 3D-industrija","article_published_time":"2021-08-16T08:40:14+00:00","article_modified_time":"2021-08-16T13:42:16+00:00","og_image":[{"width":724,"height":1024,"url":"https:\/\/3d-industrija.si\/wp-content\/uploads\/2021\/08\/miniFactory-Ultra-1-724x1024.png","type":"image\/png"}],"author":"Teja Kristof","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Teja Kristof"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/#article","isPartOf":{"@id":"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/"},"author":{"name":"Teja Kristof","@id":"https:\/\/3d-industrija.si\/#\/schema\/person\/7bb7bde1b36b2d5223ccd3255d23d6a9"},"headline":"miniFactory Ultra 3D-tiskalnik","datePublished":"2021-08-16T08:40:14+00:00","dateModified":"2021-08-16T13:42:16+00:00","mainEntityOfPage":{"@id":"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/"},"wordCount":1878,"commentCount":0,"image":{"@id":"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/#primaryimage"},"thumbnailUrl":"https:\/\/3d-industrija.si\/wp-content\/uploads\/2021\/08\/miniFactory-Ultra-1.png","articleSection":["Novice"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/","url":"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/","name":"miniFactory Ultra 3D-tiskalnik - iTehLab d.o.o. | 3D-industrija","isPartOf":{"@id":"https:\/\/3d-industrija.si\/#website"},"primaryImageOfPage":{"@id":"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/#primaryimage"},"image":{"@id":"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/#primaryimage"},"thumbnailUrl":"https:\/\/3d-industrija.si\/wp-content\/uploads\/2021\/08\/miniFactory-Ultra-1.png","datePublished":"2021-08-16T08:40:14+00:00","dateModified":"2021-08-16T13:42:16+00:00","author":{"@id":"https:\/\/3d-industrija.si\/#\/schema\/person\/7bb7bde1b36b2d5223ccd3255d23d6a9"},"breadcrumb":{"@id":"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/#primaryimage","url":"https:\/\/3d-industrija.si\/wp-content\/uploads\/2021\/08\/miniFactory-Ultra-1.png","contentUrl":"https:\/\/3d-industrija.si\/wp-content\/uploads\/2021\/08\/miniFactory-Ultra-1.png","width":2481,"height":3509},{"@type":"BreadcrumbList","@id":"https:\/\/3d-industrija.si\/index.php\/2021\/08\/16\/minifactory-ultra-3d-tiskalnik\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/3d-industrija.si\/"},{"@type":"ListItem","position":2,"name":"miniFactory Ultra 3D-tiskalnik"}]},{"@type":"WebSite","@id":"https:\/\/3d-industrija.si\/#website","url":"https:\/\/3d-industrija.si\/","name":"iTehLab d.o.o. | 3D-industrija","description":"Vse o uporabi 3D-tehnologij v industirji.","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/3d-industrija.si\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Person","@id":"https:\/\/3d-industrija.si\/#\/schema\/person\/7bb7bde1b36b2d5223ccd3255d23d6a9","name":"Teja Kristof","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/3d-industrija.si\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/959cf165da1eaf1e622c0146e584140b?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/959cf165da1eaf1e622c0146e584140b?s=96&d=mm&r=g","caption":"Teja Kristof"},"url":"https:\/\/3d-industrija.si\/index.php\/author\/tejak\/"}]}},"jetpack_featured_media_url":"https:\/\/3d-industrija.si\/wp-content\/uploads\/2021\/08\/miniFactory-Ultra-1.png","jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/3d-industrija.si\/index.php\/wp-json\/wp\/v2\/posts\/1747","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/3d-industrija.si\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/3d-industrija.si\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/3d-industrija.si\/index.php\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/3d-industrija.si\/index.php\/wp-json\/wp\/v2\/comments?post=1747"}],"version-history":[{"count":9,"href":"https:\/\/3d-industrija.si\/index.php\/wp-json\/wp\/v2\/posts\/1747\/revisions"}],"predecessor-version":[{"id":1786,"href":"https:\/\/3d-industrija.si\/index.php\/wp-json\/wp\/v2\/posts\/1747\/revisions\/1786"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/3d-industrija.si\/index.php\/wp-json\/wp\/v2\/media\/1757"}],"wp:attachment":[{"href":"https:\/\/3d-industrija.si\/index.php\/wp-json\/wp\/v2\/media?parent=1747"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/3d-industrija.si\/index.php\/wp-json\/wp\/v2\/categories?post=1747"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/3d-industrija.si\/index.php\/wp-json\/wp\/v2\/tags?post=1747"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}